DM800HD PVR is the Latest in the Dreambox series, the first Linux receiver to have High Definition and Hard Disk capability. Its a very Powerful Receiver for Digital TV and Radio programs. Main features are a 300Mhz Processor, Linux TV DVB-C API to view HDTV, 10/100Mbit compatible Ethernet Interface, DVI Connector, plug and play Tuner, Brilliant OLED display, and SATA for use of internal HDD 2.5' and eSATA.

DM800HD receives conventional satellite TV and HDTV programs and stores them on a built-in hard drive. It is available with or without built-in hard drive. You can easily build it yourself without any problem with a notebook hard disk (SATA type) up to 320GB of storage space. DM800HD stores on a 120GB hard drive up to 66 hours recording in SD and up to 17 hours in HDTV quality. The Dreambox DM800HD has an eSATA port for external hard drives, only works if you install any internal hard drive. DM800HD even saves HDTV programs simultaneously to hard disk - with a limited choice of programs.

Although only one receiver exists, you can watch simultaneously while recording another channel. The receiving part of the Dreambox can exchange ideas, so you can use the device when switching from satellite to cable on. It can connect via network cable to a computer. To dub Recordings of the Dreambox to a PC to edit movies or burn to a DVD. Via Internet browser access from your computer to the receiver and program recordings from the office. Or look for recordings via the network on a computer. The built-in card reader supports the encryption system Dreamcrypt. It on the screen helps you step by step in setting up the basic settings you desire. The box starts with a connection menu where you can set the desired image resolution.

- 300 Mhz MIPS Processor
- Linux Operating System
- OLED - Display
- MPEG-2 / H.264 Hardware decoding
- Tuner: DVB-S, optional: DVB-C, DVB-T
- Tuner Module, Plug&Play
- 1 x Smartcard-Reader
- V.24/RS232 Interface
- 10/100Mbit Ethernet Interface
- 1 x Scart (RGB, FBAS or S-Video)
- DVI
- 2 x USB 2.0
- analog modem
- S/PDIF Interface for digital bit stream out (AC-3)
- 64 MByte Flash, 256 MByte RAM
- SATA for use either as internal HDD 2.5' SATA or for extern eSATA

- unlimited channel lists for TV/Radio
- channel-change time < 1 second
- automatic service scan
- directly bouquet-lists
- EPG (electronic program guide)
- multiple LNB-Switching control (supports DiSEqC)
- OSD in many languages and skin-support
- Videotext Decoder

DBS-Tuner mit DVB-S2:

Frequency Range  950 - 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 - 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10  31 Mbaud/s (8PSK) , 10  30 Mbaud/s (QPSK)

Video decoder: Compression MPEG-2&MPEG-1,H.246 / Formats 4:3/16:9 / Letterbox for 4:3 TV-Device

Audio decoder: Compression MPEG-1&MPEG-2 Layer I & II, MP3 / Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog: Output Level L/R 0.5Vss on 600Ohm / THD>60dB(1kHz) / Crosstalk<-65dB
Output digital: Output Level 0.5Vss on 75Ohm /Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink

Ausgang Video: Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm / In conformity with ETS 300 472 Standard

TV-Scart: Output: FBAS, RGB, S-Video

Serielle Interface RS 232: Bitrate 115.2 kBit/s max SUB-D-9 Plug for Firmware Update

Ethernet: 10/100 MBit compatible for Firmware Update

Analoge modem: analoge modem for Internet connection

SATA Interface: for use either as internal HDD 2.5" or eSATA or internal 2.5" HDD

USB: 2 x USB 2.0 Host

LNB power and polarisation per tuner: Current 500mA max.; short-circuit-protected /Voltage vertical&horizontal <14V&<20V no load and >11.5V&>17.3V at 400mA

Count of active satellite position: DiSEqC 1.0/1.2 SAT Position / Option /Rotor Control

Power consumption: < 15W at 12V

External PSU Input:110-240V AC / 50-60Hz / 0.6A    Output:12V  / 3.0A
Physical specification: Temperature +15 - +35°C / Humidity<80% /Size(WxDxH):195x140x40 mm