Powerful satellite receiver for digital TV and Radio programs. Main features are a 250MHz IBM PowerPC (350 Mips). Linux OP, the AMG6688 supports the Standard Linux API(DirectFB, Linux-FB, LIRC).
This box is extremely popular in Ireland and Sweden.
Features:
- 250 MHz IBM PowerPC Processor (350 MIPS)
- 2 LED status
- Linux Operating System
- Full automatic service scan
- Supports directly bouquet-lists (indirect unlimited)
- Supports multiple LNB-Switching control (supports DiSEqC)
- 1 x Smartcard-Reader
- Unlimited channel lists for TV/Radio
- SPDI/F interface for digital bit stream out (AC-3/DTS)
- MPEG2 Hardware decoding
- Channel-change time <1 second
- Fully adaptable OSD in many languages (skin-support)
- 100Mbit full duplex Ethernet Interface
- Supports EPG (electronic program guide)
- 1 x Scart-interfaces (fully controlled by software)
Tuner:
Frequency Range 950 - 2150MHz
Signal Level -65dBm - -25dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75Ohm
AFC +/-3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 - 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35%
Demultiplexing according ISO 13818-1
Video decoder: Compression MPEG-2&MPEG-1 / PAL&NTSC /Format 4:3/16:9 / Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart) / Letterbox percolating for 4:3 TV-Device Audio decoder
Audio decoder: Compression MPEG-1&MPEG-2 Layer I&II / Mode Dual (main/sub), Stereo / Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Video parameter: Input FBAS 1Vss +/-0.3dB on 75Ohm / Teletext filter with ETS 300 472 Std
TV-Scart: Output: FBAS,RGB,S-VHS over OSD selectable
Ethernet: 10/100 MB compatible, Update of Firmware & Reprogram
LNB Power and polarisation: Current 500mA max. ; short-circuit-proof / Voltage vertical&horizontal <14V&20V without load, >11.5V&17.3V at 400mA / shut-off at Standby-Mode
Count of active satellite position: DiSEqC 1.0/1.2 Sat Position / Option / Rotor Control
Output digital: Output 0.5Vss on 75Ohm /Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz /S/PDIF-Output optical (AC3)
Output analogue: Output L/R 0.5Vss on 600Ohm / THD>60dB(1kHz) / Crosstalk<-65dB
Serial Interface RS 232: 115.2 kb/s max / SUB-D-9 for Update of Firmware & Reprogram
Power consumption: <10W / 12V
Input voltage: DC12V,alternating acurrent +/-15%
Extern power supply: Input:110-240V AC /50-60Hz/0.6A / Output:12V=/1A
Others: Temperature +15 - +35°C / Humidity<80%
Loading... Please wait...













